Tecweigh’s current range of food-grade stainless-steel weighbelt feeders has been enhanced by the release of the next gen WP50 weight processor.
The weighbelt feeders are equipped with food-grade polyurethane belts and are available with either a wave edge or stainless side skirts for optimum product containment. The polyurethane belt is kept clean by a spring-loaded UHMWPE Belt Scraper
The WP 50 bright 7 segment LED displays instantaneous throughput together with total weight and belt speed.
The WP50 is housed in a rugged stainless-steel enclosure with dust and water ingress protection to IP66 for indoor and outdoor use. The weight processor can be installed in a control room up to 1 Km away from the weighbelt feeder.
The stainless steel welded and sealed load cells have a higher ingress rating of IP68. Auto zero is performed on an empty belt then the scale is calibrated using the supplied calibration weight(s). Three modes of operation basic weigh scale, feed rate control and batch controller are enhanced by the addition of a field Bus module which allows plant PLC to interrogate the scale parameters in real time.
Read more: Weighing up the Australian food industry
Datalogging for both calibration and operational data is exportable via USB Drive into Excel readable file with lock out options for parameter and calibration security. Longevity is a Tecweigh strength with weighbelt feeders still functioning after more than 20 Years in production areas
The WF18 weighbelt feeders and the WP50 weight controller are Australian Made and are manufactured in Melbourne by Tecweigh.
Contact Tecweigh
sales@tecweigh.com.au
03 9775 0266
www.tecweigh.com.au