METALMASTER PHM-940HD
Finance Estimate
From $52.27*
per week
From 9.54% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.54% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.54% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $52.27*
per week
From 9.54% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.54% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 9.54% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | METALMASTER PHM-940HD |
| Type | Engineering - Fabrication |
| Sub Type | Shaping Equipment |
| Class | Shaper |
| Make | METALMASTER |
| Model | PHM-940HD |
| Sale Price | $10,450 GST Exclusive |
| Listing Type | New |
| Stock Number | 884762 |
| RefCode | TA1266990 |
Description
PHM-940HD Power Hammer 2.0mm Mild Steel Capacity 940mm Throat Depth
METALMASTER PHM-940HD Power Hammer 2.0mm Mild Steel Capacity 940mm Throat Depth
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: S2287
At last, there???s an affordable solution for metal shaping. The PHM-940HD Metalmaster Electric Power Hammer was designed to have all the features of larger machines without the price tag. The ability to switch between rigid and non-rigid modes to suit your project makes this machine even more flexible. Only limited by your imagination the PHM-940HD can shrink, stretch, dome, edge turn, bead and form louvers, ideal for shaping sheet metal for cars, motorbikes & airplane panels. It has a 14mm thick steel fabricated upper frame and is supplied with and extensive range of CR12 hardened steel dies for shaping steel and nylon dies for forming softer metals like aluminium.It has variable speed and the capability of shaping up to 2.0mm thick sheet mild steel and up to 3.0mm thick sheet aluminium.
Features:
Capacity - 2.0mm thick sheet mild steel
Quick change tool holder
22mm square Shank Tooling
Variable speed
Rigid & Spring Modes
940mm throat depth capacity
570mm throat height capacity
Foot pedal control with emergency stop
Steel fabricated upper frame - 14mm thick plate
Steel fabricated lower box section steel frame
Drive shafts have bronze bushes & greasing points
Adjustable heavy duty single arm length stop with 1 round roller & guide fence
Safety magnetic power switch
Steel dies made from CR12 steel & hardened
Nylon dies made from durable nylon
Includes Soft Medium & Hard Springs for different gauge thickness metals.
3kW / 4hp 240V motor
Includes:
- 1 x Set of Universal Die Holders - 16mm opening (22mm square shank)
- 1 x Set of Louvre Dies (22mm square shank)
- 1 x Set of Thumbnail Shrinking Dies (22mm square shank)
- 1 x Linear Stretching Die (22mm square shank)
-
- 1 x Set of 1/4`` Beading Dies (22mm square shank)
- 1 x Set of 3/8`` Beading Dies (22mm square shank)
- 1 x Set of 1/2`` Beading Dies (22mm square shank)
-
- 1 x Steel Upper Die (22mm square shank)
-
- 1 x Set of Round Die Holders - ??30 x 20mm (22mm square shank)
- 1 x Set of 3.1`` Doming Dies (??30 x 20mm round shank)
- 1 x Steel Lower Die - 3/4`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 7/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-1/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-1/2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-7/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 3`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 4`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 5`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 6`` Radius x 1/16`` Radius Edge (??30 x 20mm round shank)
- 1 x Steel Lower Die - 6`` Radius x 1/4`` Radius Edge (??30 x 20mm round shank)
- 1 x Steel Lower Die - 8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 14-1/2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 24`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 36`` Radius (??30 x 20mm round shank)
-
- 1 x Nylon Upper Die (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 3/4`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 7/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-1/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-1/2`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-7/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 4`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 5`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 6`` Radius x 1/16`` Radius Edge (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 6`` Radius x 1/4`` Radius Edge (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 14-1/2`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 24`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 36`` Radius (??30 x 20mm round shank)
Specifications:
ORDER CODE: S2287
MODEL: PHM-940HD
Machine (Type): Power Hammer
Machine (Type): ~
Mild Steel - Capacity (mm / Gauge): 2.0 / 12
Aluminium - Capacity (mm / Gauge): 3.0 / 8
Cubic feet per minute (CFM): ~
Tooling Height Adjustment (mm): ~
Tooling Shank Size (mm): 22
Throat Depth (mm): 940
Throat Height (mm): 570
Length of Stroke Adjustment (mm): ~
Radius Anvil Sizes (mm): ~
Speed - blows per minute (BPM): 0 - 960 (Variable)
Air Consumption (CFM): ~
Working Height (mm): ~
Air Pressure (psi): ~
Motor Power (kW / hp): 3 / 4
Voltage / Amperage (V / amp): 240 / 15
Machine Dimensions (LxWxH) (mm): 940 x 1600 x 2260mm
Tooling Holder/Power Unit Dimensions (LxWxH) (mm): 800 x 850 x 700
Nett Weight (kg): 970
To Purchase Online Please Visit The Machineryhouse Website & Search For 'S2287'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
METALMASTER PHM-940HD Power Hammer 2.0mm Mild Steel Capacity 940mm Throat Depth
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: S2287
At last, there???s an affordable solution for metal shaping. The PHM-940HD Metalmaster Electric Power Hammer was designed to have all the features of larger machines without the price tag. The ability to switch between rigid and non-rigid modes to suit your project makes this machine even more flexible. Only limited by your imagination the PHM-940HD can shrink, stretch, dome, edge turn, bead and form louvers, ideal for shaping sheet metal for cars, motorbikes & airplane panels. It has a 14mm thick steel fabricated upper frame and is supplied with and extensive range of CR12 hardened steel dies for shaping steel and nylon dies for forming softer metals like aluminium.It has variable speed and the capability of shaping up to 2.0mm thick sheet mild steel and up to 3.0mm thick sheet aluminium.
Features:
Capacity - 2.0mm thick sheet mild steel
Quick change tool holder
22mm square Shank Tooling
Variable speed
Rigid & Spring Modes
940mm throat depth capacity
570mm throat height capacity
Foot pedal control with emergency stop
Steel fabricated upper frame - 14mm thick plate
Steel fabricated lower box section steel frame
Drive shafts have bronze bushes & greasing points
Adjustable heavy duty single arm length stop with 1 round roller & guide fence
Safety magnetic power switch
Steel dies made from CR12 steel & hardened
Nylon dies made from durable nylon
Includes Soft Medium & Hard Springs for different gauge thickness metals.
3kW / 4hp 240V motor
Includes:
- 1 x Set of Universal Die Holders - 16mm opening (22mm square shank)
- 1 x Set of Louvre Dies (22mm square shank)
- 1 x Set of Thumbnail Shrinking Dies (22mm square shank)
- 1 x Linear Stretching Die (22mm square shank)
-
- 1 x Set of 1/4`` Beading Dies (22mm square shank)
- 1 x Set of 3/8`` Beading Dies (22mm square shank)
- 1 x Set of 1/2`` Beading Dies (22mm square shank)
-
- 1 x Steel Upper Die (22mm square shank)
-
- 1 x Set of Round Die Holders - ??30 x 20mm (22mm square shank)
- 1 x Set of 3.1`` Doming Dies (??30 x 20mm round shank)
- 1 x Steel Lower Die - 3/4`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 7/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-1/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-1/2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 1-7/8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 3`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 4`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 5`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 6`` Radius x 1/16`` Radius Edge (??30 x 20mm round shank)
- 1 x Steel Lower Die - 6`` Radius x 1/4`` Radius Edge (??30 x 20mm round shank)
- 1 x Steel Lower Die - 8`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 14-1/2`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 24`` Radius (??30 x 20mm round shank)
- 1 x Steel Lower Die - 36`` Radius (??30 x 20mm round shank)
-
- 1 x Nylon Upper Die (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 3/4`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 7/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-1/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-1/2`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 1-7/8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 4`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 5`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 6`` Radius x 1/16`` Radius Edge (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 6`` Radius x 1/4`` Radius Edge (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 8`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 14-1/2`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 24`` Radius (??30 x 20mm round shank)
- 1 x Nylon Lower Die - 36`` Radius (??30 x 20mm round shank)
Specifications:
ORDER CODE: S2287
MODEL: PHM-940HD
Machine (Type): Power Hammer
Machine (Type): ~
Mild Steel - Capacity (mm / Gauge): 2.0 / 12
Aluminium - Capacity (mm / Gauge): 3.0 / 8
Cubic feet per minute (CFM): ~
Tooling Height Adjustment (mm): ~
Tooling Shank Size (mm): 22
Throat Depth (mm): 940
Throat Height (mm): 570
Length of Stroke Adjustment (mm): ~
Radius Anvil Sizes (mm): ~
Speed - blows per minute (BPM): 0 - 960 (Variable)
Air Consumption (CFM): ~
Working Height (mm): ~
Air Pressure (psi): ~
Motor Power (kW / hp): 3 / 4
Voltage / Amperage (V / amp): 240 / 15
Machine Dimensions (LxWxH) (mm): 940 x 1600 x 2260mm
Tooling Holder/Power Unit Dimensions (LxWxH) (mm): 800 x 850 x 700
Nett Weight (kg): 970
To Purchase Online Please Visit The Machineryhouse Website & Search For 'S2287'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
Related Listings
View MorePremium Ad
13
$11,550
BUTLER 12" SLOTTER
- » Listing Type: Used
- » Class: Slotter
Boolaroo, NSW
1
$1,520
HAFCO METALMASTER TBF-S51
- » Listing Type: New
- » Class: Shaper
Stores Australia Wide
Dealer's Other Listings
View More20
$4,690
METALMASTER PHM-560MK2
- » Listing Type: New
- » Class: Shaper
Stores Australia Wide
20
$8,250
METALMASTER PHM-760HD
- » Listing Type: New
- » Class: Shaper
Stores Australia Wide
