In the aftermath of crisis, businesses and their communities lean on each other to navigate the long road to recovery. Even in areas where extreme weather events are an expected annual occurrence, things can turn quickly, leaving entire towns stranded or without access to crucial infrastructure. Read more
Lubrication is the lifeblood of industrial manufacturing environments. Without high-grade, reliable lubricant products, components like chains and bearings have significantly reduced wear resistance, and end up costing businesses far more in the long run. According to John Knight, Lubrication Systems product manager at Alemlube, premature component failure can almost always be put down to poor lubrication practices. Read more
When operating on agricultural land, it is important to prioritise services and supply designed for our unique and often unpredictable landscapes. So often, Australian farmers are left disappointed with the quality of imported consumables such as tractor lubricants. This was the case for Peter Vicary in the 1980s, when he and his sons, Ben and Andrew, founded Gulf Western Oil. Read more
With ever-tightening health and safety regulations being implemented across the food and beverage industry, production sites require close monitoring and consistently reliable products without fuss. Companies must ensure they are in compliance with HACCP, ISO and NSF H1 standards at all times, keeping up to date documentation of chemical use in a holistic, cost-effective way. Read more
When it comes to conveyor manufacturing, the first thing that comes to mind is how to set things in motion. Everything that needs to move along a production line, requires a positive drive. Read more
The CRC Greenlight program sounded like the perfect package to Steve Carr, Engineering Manager for Suprima Bakeries, when he first learned about the program through John Perri, Key Account Executive at BSC. Read more
Australia’s award-winning extra virgin olive oil, Cobram Estate, is advertised as ‘the only oil you need,’ and while that message pertains to the delicate process of cooking, the less delicate process of harvesting the olives relies on other types of lubricants, as Bryden Coote, Branch Manager at BSC’s Swan Hill explains.
“When you have a chain worth thousands of dollars installed on a harvesting machine, it can become quite expensive if the chains do not last through the harvest season, not to mention the downtime from having to replace the chain in the middle of harvesting,” says Bryden.
Cobram Estate is the flagship brand of Boundary Bend Limited (BBL) – Australia’s largest olive farmer and producer of extra virgin olive oil. Across its multiple olive groves in the Murray Valley region of Victoria, BBL owns over 2.5 million olive trees on more than 6000 hectares of farmland.
To efficiently harvest olives from these groves, BBL has been involved in developing its own unique olive harvester machines that enable continuous harvesting rather than the discontinuous system used in most other olive growing countries. During the harvest season, these machines work 24 hours a day to pick the olives when they are at their best.
Over the past couple of years and as recommended by Bryden, Sam Griffiths, Maintenance Manager at the Boundary Bend Estate has been using CRC TAC2 chain lubricants for the maintenance of the Boundary Bend harvester machines – with more than satisfactory results.
“Every day, as part of our routine maintenance, we spray the CRC TAC2 on the harvester chains and this has helped us extend the service life of the chains considerably,” says Sam. “We only use the harvester machines during the harvest season but by keeping the chains lubricated throughout the year, we have almost halved our chain breakdowns. Now we only replace the chains once or twice a year as part of our routine maintenance.”
Iain Faber, National Channel Manager at CRC Industries explains why TAC2 is a suitable choice for lubricating high-speed chains, such as the ones in Boundary Bend’s harvesters.
“The CRC TAC2 is a dual-viscosity lubricant, which means it can be sprayed onto the chain as an oil but it firms up into a grease-like consistency as it sets, enabling it to remain in place without flinging off. Because of this unique formulation, TAC2 can penetrate into the pins and the seals in the chain to effectively protect the chain against wear.
“Moreover, the TAC2 lubricant is resistant to water wash downs, so it can be safely used in areas where water is present. It has a wide operating temperature range, so you can use TAC2 in both hot and cold temperatures.”
But TAC2 is not the only chain lubricant CRC has on offer. The CRC GEL TAC is another chain lubricant with similar properties as TAC2 but suited to different applications, as Iain explains.
“I always use the example of a motorbike and a forklift,” says Iain. “Whereas the TAC2 is best suited for high speed applications like motorbike chains, GEL TAC is designed to stay in place in low speed, high pressure applications such as the chains used in general leaf and pin chains and overhead forklifts.
“The CRC GEL TAC has the similar benefits as the TAC2 in terms of dual-viscosity and water resistance, in addition to having a higher temperature performance. The GEL TAC can withstand temperatures up to 300 degree Celsius compared to the 165 degree Celsius in TAC2. Both products are water-insoluble, meaning that they both perform very well in high water environments and resist water wash off.
Additionally, CRC also offers the Food Grade range of chain lubricants for applications where risk of incidental contact with food is present.
“The CRC Food Grade chain lubricants use a special blend of mineral oil and synthetic additives. The formulation for these lubricants is such that after you spray the oil, it forms bubbles and this foaming action gives the oil better penetration rate into the chain,” he says.
“CRC’s Food Grade range are all NSF-H1 certified and tested for a list of 25 allergens, making them safe to use across all food processing applications. CRC also has all of the certifications required for audit purposes, enabling food processors to easily produce these when required.”
Back to the context of the BBL application, Bryden says in addition to recommending the best lubrication product for each application, BSC experts can also advise on the best maintenance regime to help extend the chain longevity for customers.
“Our customers invest heavily on chains and sprockets for their equipment and it’s important that these chains are maintained as best as possible. When BSC staff visit any site, they often check the equipment and make maintenance recommendations depending on the site conditions and the equipment available on the plant,” says Bryden.
As for Sam, he says he is quite pleased with the services he receives from the BSC Swan Hill branch, particularly Bryden, with whom he has been engaging regularly for the past four years.
“BSC is a very good supplier and the team are genuinely helpful, always going out of their way to supply us the required parts and products when we need them urgently. It’s a relationship built on trust and grown over time.”
Read more articles like this at: www.lets-roll.com.au
Safety was top of mind for a top Australian manufacturer of bakery products when they approached their long-term product suppliers at BSC seeking recommendation for a suitable chain lubricant. Nick Gunn, the BSC account manager at the time, recommended the ROCOL FOODLUBE Hi Temp Chain Lubricant from ITW Polymers and Fluids, which resulted in a long-term supply program, covering not just the ISO-certified oven chain lubricants, but also a wide range of other oils and greases in the FOODLUBE family.
According to Nick, the ROCOL FOODLUBE portfolio adds an invaluable safety dimension that not only ensures food industry requirements are met, but additionally works to optimise the production in food plants and simplify the overall cleaning process.
“FOODLUBE’s reputation as a globally recognised lubricant for food and beverage manufacturing means that our customer could use the products with complete peace of mind, with no concerns regarding contamination or machinery performance,” he says. “Due to the wide operating temperatures, FOODLUBE Hi-Temp Chain Oil can operate at temperatures ranging from minus 25 degrees to 280 degrees Celsius, they use the same product in their ovens, as well as in their freezers.”
Emilio Seballos, Channel Manager for Heavy Industry at ITW Polymers and Fluids, explains what makes the FOODLUBE proposition attractive for food manufacturers.
“ROCOL FOODLUBE has NSF accreditation, which is globally recognised, and it is also HACCP certified. On top of that, many ROCOL products provide an additional level of safety assurance through their ISO 21469:2006 certification. Like NSF H1, this certification is globally recognised and important for British Retail Consortium audits as it provides credible, independent assurance that products are formulated, manufactured, stored and supplied hygienically and safely.”
Another area where food manufacturers can benefit from the use of ROCOL FOODLUBE products, Emilio explains, is to rationalise and simplify their lubricant inventories.
“The technology behind food grade lubricant products has improved drastically over the last 10 to 15 years. Whereas many food manufacturers still prefer to keep separate inventories for food grade and non-food grade lubricant in their plants, they are increasingly coming to realise the simplifications they can achieve by switching to food-safe products through more of their applications, thus eliminating the risk of cross-contamination in their plants,” he says.
“In the case of the FOODLUBE product range, all the oils and greases are made with a synthetic base oil, which means they don’t break down and carbonise when exposed to high temperatures. This in turn leads to prolonged maintenance intervals as the lubricant does not evaporate from the chain, nor does it cause the chain to drag. The FOODLUBE Hi Temp Chain Spray also has great resistance to water washdowns, so you don’t need to lubricate your chain as frequently in a high water washdown environment. All of this leads to reduced maintenance expenses for the plants and enhances their total reliability and efficiency,” he adds.
As a routine practice, Emilio says the ITW and BSC personnel often perform joint assessments for BSC clients to help them rationalise their inventories.
“The beauty of the ROCOL FOODLUBE portfolio is that many of the products serve multiple purposes. For example, your gearbox oil in one application can be used as chain lubricant in another application. Similarly, your hydraulic lubricant might double up as a chain lubricant, depending on the situation,” he says.
“Where ITW P&F and BSC come into play is to help our customers rationalise their inventories to simplify their management. In one audit we did in conjunction with BSC some years ago, the customer was using 25 different lubricants from 13 different brands. We were able to simplify this down to 12 lubricants from the FOODLUBE range.”
Within this portfolio, Emilio says the FOODLUBE Premier 1 grease has been a “game-changer” in the food industry.
“The FOODLUBE Premier 1 grease is a food grade grease designed for bearings operating at high speeds and high temperatures. Because this grease has a consistency grade of 1, in addition to a wide temperature range of minus 30 to 180 degree Celsius, it can effectively replace multiple types of greases in one application line.
“The FOODLUBE Premier 1 grease is resistant to water washdowns and ISO21469 certified, so you can safely use it where stringent quality control measures are in place.”
The FOODLUBE WD spray is another popular product within the range, Emilio says.
“The FOODLUBE Water Displacement (WD) spray is ideal for use as a general lubricant to protect small components such as linkages, pivots and pins. Having high temperature resistance (up to 120 degree Celsius) and being synthetic based make this a multi-purpose spray that you can use for many applications. The WD Spray is also fortified with PTFE for increased lubricity and like all FOODLUBE products, it is free from colour and odour – which is very important in the food industry.”
As an additional safety measure, all plastic components including the lids and actuators in the ROCOL FOODLUBE products are metal detectable and capable of detection by most metal detection equipment.
Read more articles like this at: www.lets-roll.com.au